The Radial ProRMP is a passive box that allows for re-amping of the signal. Re-amping has been the ‘secret weapon’ for countless recordings by the biggest names in the business and the process is often used on guitars, bass, keyboards, percussion and even voice to create new textures! The ProRMP is a 100% passive re-amplifier that lets you to take a pre-recorded track and re-amplify it through a guitar amp or effects pedals to create new and exciting tones. Dive into the creative possibilities of re-amping with the ProRMP.
Radial ProRMP at a Glance:
Easy to use
Easy to use
Plug and play easy to use, the ProRMP connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit!
The magic behind the ProRMP’s great tone is a custom wound transformer that at once converts the balanced low-z source to a hi-z input for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound.
Like all Radial products, the ProRMP is built tough! Encased in a 14-gauge steel, the ProRMP employs a unique book-end design with a welded I-beam frame that protects it from damage and assures the PC board and solder points will not be stressed, adding durability. A full-bottom no-slip pad works double duty by providing plenty of stay put while also eliminating electrical contact points from guitar amp chassis bolts that could cause ground loops.
Plug a standard balanced cable from your recorder or mixer output to the ProRMP’s XLR input. Connect the 1/4″ ProRMP output to your instrument amp. Adjust the ProRMP’s output level control as required to match the amp input and engage the ground lift switch to eliminate any hum and buzz caused by ground loops.
Radial ProRMP Features:
Play pre-recorded tracks through amps and pedals
Opens the door to creative new tones and textures
Eliminates repetitive playing during recording
On board level control for fine tuning the gain
Transformer isolated to eliminate buzz and hum
Built from 14-gauge steel
Type: Passive DI
Inputs: 1 x XLR
Outputs: 1 x 1/4″
Weight: 1.2 lbs.